Technical perfection and timeless elegance. The brand new SMARTSURFACE with brilliant Full-HD display combines state-of-the-art technology and architecture-oriented design options. Whether drywall, brickwork or furniture – flush mounted, the touch panel connects seamlessly with almost all surfaces. The “smart dots” integrated into the high-quality, continuous glass surface allow direct access to useful functions – without any detours. Thanks to the stationary installation and the integrated presence detector, the SMARTSURFACE is instantly available as a control and information centre as soon as you approach it. The uncompromising selection of components guarantees trouble-free and noise-free 24/7 operation.
FULL-HD-DISPLAY
The SMARTSURFACE Touch Panel PCs are consistently equipped with brilliant Full-HD displays – in all sizes. This means that visualisations and other applications are always in razor-sharp focus.
No-compromise quality. MADE IN GERMANY
Designed in Germany. Made in Germany – components in industrial quality guarantee maximum reliability – anywhere and anytime. An uncompromising selection of components and the intelligent, fan-less design enable trouble-free and noise-free 24/7 operation. The use of high-quality stainless steel and a security lock additionally guarantee long durability and offer protection against manipulation and theft.
SMART DOts – No detours
On the high-quality, continuous safety glass surface of the SMARTSURFACE there are the so-called “Smart Dots” as an additional operating option. You can access useful functions via the four freely configurable keys. For example, you can call up the “Coming Home” or “Leaving Home” scenes without having to search for them. With the integrated configuration software, you can easily assign the desired functions. Numerous additional icons are available for labelling the functions. They are displayed as soon as you approach the panel without having to call up the complete visualisation. Two additional concealed buttons allow you to control the screen brightness and switch the panel on and off.
Architect’s Darling.
Whether drywall, brickwork or furniture – flush-mounted, the touch panel connects seamlessly to almost all surfaces. Available in the colours Crystal White or Obsidian Black – elegantly restrained or rich in contrast – the SMARTSURFACE cuts a good figure in all situations. Adjust the menu color to the frame color at the push of a button. The glass bead blasted end frame provides a noble finish in all installation situations.
Assembly made easy
The well thought-out mounting concept of the SMARTSURFACE makes installation very easy. Intelligent holding and locking devices ensure perfect alignment of the panel. The intelligent frame construction enables both flush and conventional mounting.
Voice Intercom Integration
Use the SMARTSURFACE additionally as indoor station for your door intercom. The optionally available “Clear Voice Module” ensures crystal clear voice transmission. The pre-installed launcher software CONTROL T2 offers you convenient operating options. In combination with the INTERCOMMODULE, the SMARTSURFACE becomes an indoor station for the door intercom system.
CONTROL T 2 keeps you in control.
The pre-installed software is the control and information centre for your building. Get information about the current traffic situation or call up weather data before you leave the building. An overview of the cameras can be called up just as easily as audio and video content from any source. Easily integrate selected Axis<sup® cameras via Plug & Play. Further IP cameras can be integrated just as easily. You can individualise your user interface directly in CONTROL T 2, and with the two available display variants (light and dark) you can adapt the user interface to the frame colour. In this way, you can transform every SMARTSURFACE into an individual control and information center. The software is pre-installed on every SMARTSURFACE free of charge.
The SMARTSURFACE as design-oriented control and information centre.
Once connected to the local network, the SMARTSURFACE offers universal control options for all areas. For example, operate your building visualisation based on KNX or EnOcean, control local applications or web services such as music services. In combination with the INTERCOMMODULE, the SMARTSURFACE becomes an indoor station for the door intercom system. With the pre-installed launch software CONTROL T 2 you can switch quickly and conveniently between the various applications. For example, you can switch at lightning speed between building visualisation, traffic news or the weather forecast.
04900s - SMARTSURFACE 133 Obsidian Black / 04900w - SMARTSURFACE 133 Crystal White (13,3" FHD-wide) - Ausschreibungstext DE (RTF)
04901s - SMARTSURFACE 156 Obsidian Black / 04901w - SMARTSURFACE 156 Crystal White (15,6" FHD-wide) - Ausschreibungstext DE (RTF)
04902s - SMARTSURFACE 185 Obsidian Black / 04902w - SMARTSURFACE 185 Crystal White (18,5" FHD-wide) - Ausschreibungstext DE (RTF)
04903s - SMARTSURFACE 215 Obsidian Black / 04903w - SMARTSURFACE 215 Crystal White (21,5" FHD-wide) - Ausschreibungstext DE (RTF)
Art. No.
- Art. No. 04900s – SMARTSURFACE 133 Obsidian Black / Art. No. 04900w – SMARTSURFACE 133 Crystal White (13,3″ FHD-wide)
- Art. No. 04901s – SMARTSURFACE 156 Obsidian Black / Art. No. 04901w – SMARTSURFACE 156 Crystal White (15,6″ FHD-wide)
- Art. No. 04902s – SMARTSURFACE 185 Obsidian Black / Art. No. 04902w – SMARTSURFACE 185 Crystal White (18,5″ FHD-wide)
- Art. No. 04903s – SMARTSURFACE 215 Obsidian Black / Art. No. 04903w – SMARTSURFACE 215 Crystal White (21,5″ FHD-wide)
- Art. No. 04930 – Universal Cover Frame for SMARTSURFACE 133 / Art. No. 04932 – Universal Cover Frame for SMARTSURFACE 185
- Art. No. 04931 – Universal Cover Frame for SMARTSURFACE 156 / Art. No. 04933 – Universal Cover Frame for SMARTSURFACE 215
- Art. No. 04920 – Wallbox for SMARTSURFACE 133 / Art. No. 04921 – Wallbox for SMARTSURFACE 156
- Art. No. 04922 – Wallbox for SMARTSURFACE 185 / Art. No. 04923 – Wallbox for SMARTSURFACE 215
- Art. No. 04990 – Operating System Windows 10 IoT Enterprise Multi-Language 2016 (pre-installed)
- Panel PC with Capacitive Multi Touch Technology
- Front: Hardened protective screen
- Frame colour: Crystal White / Obsidian Black
- Display: Industrial grade colour TFT display, LED backlight
- Resolution: FullHD, 1920×1080
- Housing: Stainless Steel
- Fan: Fanless
- Processor: Intel® Pentium™ N3710 4-Core
- Main memory: 4 GB DDR3L
- Hard disk: 64 GB mSATA industrial grade flash memory I-Temp MLC
- Graphic: Intel HD Graphics 405
- Power supply: 24 – 50 V DC via 3-pin plug-in screw terminal of coded female connector (with spring-loaded terminal)
- Ambient temperature: 0 – 45 °C (during operation)
- Connections:
– Network: 1 x Ethernet Connection, 10/100/1000 Mbit/s
– USB: 4 x Ports (2 x USB 2.0 / 2 x USB 3.0)
+ 1 x Port (USB 2.0 accessible in service position)
– Video Output: 1 x Mini-HDMI (Typ A)
– SPDIF: 1 x TOSLink (POF) & 1 x RCA (Coaxial)
– Audio Output: 1 x headphone jack Stereo, 3,5 mm
– Microphon Input: 1 x microphone jack, 3,5 mm
– Loudspeaker: 2 x 2,8 W speaker (built in)
– Sensor: Presence detector with Radar technology
– Sensor keys: 6 x (2 x sensor keys (Power/Brightness)
+ 4 x sensor keys freely customizable)
Type: 133_ |
Type: 156_ |
Type: 185_ |
Type: 215_ |
- Power Supply PSM4/96.24
- SMARTSURFACE Recovery Stick (please contact us for request)
| QUESTION | ANSWER |
| During manual installation, the message "The language cannot be installed on this computer." | This message appears if your language pack is incompatible. In this case please check which Windows version including the "Build Number" is installed and which processor architecture is installed. The Windows version and build number can be easily displayed with the console command "winver" (Windows key + R) or via Windows "Settings" / "System" / "Info". With this information you can check which language packages are compatible. |
| After the SMARTSURFACE was restarted, the previous display language is active. | In this case the write protection on the SMARTSURFACE is activated. Restart the SMARTSURFACE, deactivate write protection and reactivate the display language. For detailed information on write protection, see the documentation. |
| The SMARTSURFACE does not boot automatically from the recovery stick. How do I initiate manual booting ? | In delivery state, booting from the USB port is preset. Therefore, usually the SMARTSURFACE only has to be switched on to start from a connected bootable USB stick. In case the SMARTSURFACE does not boot from a connected USB stick, switch off the SMARTSURFACE, connect a USB keyboard in addition to the recovery stick and switch on the SMARTSURFACE again. In order to boot from the Recovery Stick, the boot sequence must be changed immediately after switching on the SMARTSURFACE. To do this, call the boot menu by pressing [F11] or [F7] on the keyboard. Select the connected recovery stick from the selection list which is now displayed. After confirming the selection, the SMARTSURFACE starts from the recovery stick and loads the WIMager application. |
| In the delivery state there are two files on the Recovery Stick. What is their function and can they be deleted? | "recovery_Braswell.wim" and "recovery_Skylake.wim" are the image files of the delivery state for the two available CPU variants of the SMARTSURFACE. These files contain among other things the complete Windows operating system without your individual configuration (e.g. serial number). Thus, they serve to restore the delivery status of the SMARTSURFACE. |
| Can these files be copied and deleted from the stick to free up space on the Recovery Stick? | All image files on the Recovery Stick can be backed up or archived on external drives. The image files can be found under the "WIMAGES" directory. In this directory you can copy image files from the Recovery Stick, delete them or add new image files to the Recovery Stick. It is also possible to rename existing image files in this directory. |
| Are the image files on the Recovery Stick deleted when I want to backup the current state of the SMARTSURFACE? Or can new images be backed up until the USB stick is full ? | Existing image files on the Recovery Stick are not deleted when creating new images. Note: We recommend adding a date to the file name. If you add a name that already exists in the "WIMAGES" directory on the Recovery Stick, you will receive a warning. If you ignore this warning, the existing image file will be overwritten! You can create image files until the disk space of the Recovery Stick is used up. |
| What do I understand by the selection "Restore delivery status" and does the Recovery Tool automatically distinguish which system I am dealing with? | The delivery state means the state at delivery of the SMARTSURFACE. It contains the complete Windows operating system without individual configuration or additional software (except CONTROL T and SMART DOTS). For this function, a selection of the image file is not necessary or not possible. The Recovery Tool recognizes the CPU and automatically plays back the corresponding image. Note: The Recovery Tool requires that the images "recovery_Braswell.wim" and "recovery_Skylake.wim" are available on the Recovery Stick under the "WIMAGES" directory! |
| How can I disable Windows gestures? | The Windows 10 wiping gestures on touchscreen monitors or on our SMARTSURFACE can interfere with the operation (navigation). The permanent deactivation is done by the Windows registry editor: You can call the Windows Registry Editor by pressing the Windows key + "R" and entering the command "regedit" and confirming "OK". Change to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\AllowEdgeSwipe This path/key activates and deactivates the wipe gestures. If this key is not available, it can be simply created again. Then create the following value as DWORD32 below it: AllowEdgeSwipe This value is responsible for switching the Windows 10 wipe gestures on and off. The following applies: 0 = Wipe gestures are disabled 1 = Wipe gestures are activatedThe change only becomes valid after a restart. |
| The changes on the SMARTSURFACE are not saved. | The write protection is active. For further information, please go to the regarding chapter in the documentation. |
| Do you need virus protection on the SMARTSURFACE? | The write protection prevents changes by malware. Therefore, we recommend that it is only switched off in exceptional cases. |