HTS10

THE NEW HYBRID TOUCH SENSOR

The »HTS10« intelligently combines the advantages of tactile key operation and those of a precise touch screen. With its configurable mechanical buttons, any desired function is called up without detours. The high-resolution 10-inch display is the perfect canvas for staging CUBEVISION 2. The building visualisation, optimised for touch operation, benefits from all the advantages of the touchscreen and is supported by the dynamic function assignment of the mechanical buttons.
From simple lighting control to complex Smart Home functions – the user simply determines the button assignment himself. Current values of the integrated sensors are clearly displayed in the Launchpad and made available to the KNX system on request. An integrated camera as well as a specially adapted microphone and loudspeaker unit offer optimal conditions for the use of your video intercom system. Suitably designed for a standard flush-mounted insert, the HTS10 is also easily suitable for retrofitting.

Full Overview.

In your intelligent Launch Pad

The CUBEVISION 2 Launch Pad was specially developed for the HTS10. It clearly displays the measured values of the temperature, eCO2, humidity and brightness sensors. If desired, these values can be sent directly to the KNX bus. HTS10 and CUBEVISION 2 work hand in hand: lighting, ventilation and temperature control are precisely adapted to your needs. In this way, the dream team always ensures the perfect feel-good climate in your Smart Home.

Modern door communication.

Perfectly staged

Together with the INTERCOMMODULE you integrate a large number of video door intercoms in the HTS10. An additional indoor station can be omitted or replaced. When the doorbell rings, the video image of the door intercom system opens on the HTS10. The mechanical buttons of the HTS10 now automatically provide the functions for communication and control.

Easy and adaptable.

The »HTS10« is particularly easy to install and flexible in its use.

Designed to fit a standard flush-mounted insert, the HTS10 is also easily suitable for retrofitting. The precisely manufactured wall bracket is completely recessed in the housing and thus provides a perfect finish to the wall. Thanks to the magnets integrated into the bracket and the direct feed-through of the connections, the unit is simply put on and is immediately ready for use.

The security screws positioned on the top and bottom protect the HTS10 from theft. Different boreholes and shapes allow mounting in Europe, the USA and Asia.

BRILLIANT APPEARANCE

The ten-inch display of the HTS10 impresses with a resolution of 1920 x 1200 pixels and thus offers the CUBEVISION 2 building visualisation the canvas for the perfect appearance. An integrated full HD camera as well as the specially adapted microphone and loudspeaker unit offer optimal conditions for the use of your video intercom system.

 

WOULD YOU LIKE A LITTLE MORE?

From simple lighting control to complex smarthome functions – with the Smart Function Creator in CUBEVISION 2, the user can easily determine the key assignment himself. If the five mechanical buttons are not enough – no problem for the hybrid push button sensor! By simply sliding the icons up and down, you can dynamically assign additional functions to the buttons.

 

VERSATILE APPLICATION POSSIBILITIES

The current values of the integrated sensors are clearly displayed in the Launchpad. Whether eCO2, brightness, temperature or humidity – all information is made available to the KNX system on request and can be used as triggers for smarthome functions. For example, use information about changing temperatures to control the heating or activate the ventilation system when a CO2 value is exceeded. 

 

MOUNTING MADE EASY

The HTS10 is designed for mounting on a standard flush-mounted device box and is therefore ideally suited for retrofitting. The integrated WiFi module enables easy integration into the local network. A 230 V switching power supply unit (e.g. art. no. 35425) for the flush-mounted box provides the necessary power supply. For installations with an external 24 V power supply, use the LAN connection module (art. no. 04151, in preparation) to connect the HTS10 via Ethernet cable if desired. Alternatively, use the optionally available PoE connection module (art. no. 04150, in preparation). The power supply and the LAN connection are established via easily accessible connection terminals. 

 Technical data

Art. no. 35425 – Flush-mounted Power Supply 230 V